'Dog N°2' Ceramic Sticker

Dear fellow ceramic artists,

We're excited to introduce ceramic transfer stickers, offering new creative opportunities for your decorations!

Where can you use them?
-On already glazed ceramic surfaces (stoneware, porcelain, earthenware, etc.).
-Best applied on glossy surfaces for optimal adhesion.

How It Works
1. Choose your preferred ceramic transfer design.
2. Cut it precisely with scissors or a scalpel.
3. Soak the cut piece in water for a few seconds until the transfer layer detaches.
4. Apply it to your ceramic surface and adjust the positioning.
5. Use a sponge, soft cloth, or plastic rib to remove air bubbles and excess water.
6. Let it dry for at least 12 hours for optimal adhesion.
7. Fire at approximately 850°C / 1560°F for a perfect finish!

Recommended Firing Program
- Ramp 1: Up to 420°C in 210 minutes (3h30) → Up to 240 minutes for large loads.
- Ramp 2: Gradually increase from 420°C to 860-880°C over 180 minutes (Adjust based on your kiln and ceramic type.).
-Hold: Maintain peak temperature for 15 minutes.
- Cooling: Allow slow, natural cooling for the best results.
A comprehensive application and firing guide is included with every order.

Product Features
-Dishwasher & microwave-safe after firing.
-Size: A5 (20.2 x 13.9 cm usable area) / A4 (20.2 x 28.5 cm usable area).
-Note on color: The final fired colors may differ from the pre-fired print and website images.
-Important: Variations in kiln, glaze, and ceramic body can affect the outcome, so test before large-scale production.
-Printed by our team in France.

Happy creating, and have fun!