We're excited to introduce ceramic transfer stickers, offering new creative opportunities for your decorations!
Where can you use them? -On already glazed ceramic surfaces (stoneware, porcelain, earthenware, etc.). -Best applied on glossy surfaces for optimal adhesion.
How It Works 1. Choose your preferred ceramic transfer design. 2. Cut it precisely with scissors or a scalpel. 3. Soak the cut piece in water for a few seconds until the transfer layer detaches. 4. Apply it to your ceramic surface and adjust the positioning. 5. Use a sponge, soft cloth, or plastic rib to remove air bubbles and excess water. 6. Let it dry for at least 12 hours for optimal adhesion. 7. Fire at approximately 850°C / 1560°F for a perfect finish!
Recommended Firing Program - Ramp 1: Up to 420°C in 210 minutes (3h30) → Up to 240 minutes for large loads. - Ramp 2: Gradually increase from 420°C to 860-880°C over 180 minutes (Adjust based on your kiln and ceramic type.). -Hold: Maintain peak temperature for 15 minutes. - Cooling: Allow slow, natural cooling for the best results. A comprehensive application and firing guide is included with every order.
Product Features -Dishwasher & microwave-safe after firing. -Size:A5 (20.2 x 13.9 cm usable area) / A4 (20.2 x 28.5 cm usable area). -Note on color: The final fired colors may differ from the pre-fired print and website images. -Important: Variations in kiln, glaze, and ceramic body can affect the outcome, so test before large-scale production. -Printed by our team in France.
